Steca TR 0603mc U
Description
The Steca TR 0603mc U controller was developed specifically for the North American market as a variant of the basic Steca TR 0603mc+ controller. Special approval (ETL mark) via a testing laboratory recognised in the United States as an NRTL (Nationally Recognized Testing Laboratory) means that the relevant safety standards and minimum requirements of the North American market have been met.
In the installation housing, the device connection is created either as a plug & play solution for grid and pump connections or alternatively with 1/2 inch apertures.
As a special highlight, the Steca TR 0603mc U stores the operating data from the system on an SD card. The 40 pre-programmed equipment systems and numerous additional functions facilitate universal use of the controller. The large graphic display shows animated control loops to visualise the operating states of the respective system. Steca TR 0603mc U has six inputs for temperature or pulse detection as well as an additional Grundfos Direct Sensors™ input for combined temperature and flow measurement. Three partially speed-controlled outputs are used to control pumps and switching valves.
Features
Product features
- Compact, multipart designer casing
- Electronic speed control
- High level of operational safety through fault diagnosis
- Hours-of-operation logger
- Software update possible
- Storage tank target temperature loading
- Seasonal systems (loading of pool / storage tank according to the time of the year)
- Daily pump start
- Plug & play for 120 V AC mains and pump connections in installation casing
- Screwed connections facilitate fast sensor installation
- Integrated Steca TPC 1 bus
Displays
- Multifunction graphical LC display with backlighting
- Animated representation of the systems and operating states
Operation
- Multilingual menu navigation
- Side switch for manual, auto, off
Options
- Installation casing with 1/2 inch cut-outs as an alternative to plug & play
Functions
- Data logger on SD card
- Heat quantity (Grundfos Direct Sensors™, pulse generator, determination)
- Heating return increase
- Reduction of stagnation phases
- Holiday (storage tank recooling)
- Circulation (controlled by temperature / time / pulse)
- Back-up heating
- Solid fuel boiler
- Storage tank quick charge
- Bypass
- Thermostat
- Differential thermostat
- Timer
- Interval / tube collector
- Anti-freeze
- Anti-legionella cyclical storage tank heating
- Display storage tank top
- Alarm output
- Two loading zones
Downloads
Product data sheet
Manuals
Product pics, technical drawings, etc.
Technical data
| TR 0603mc U | |
|---|---|
| System voltage | 120 V AC, 60 Hz |
| System voltage optional | 240 V AC, 60 Hz |
| Standby | 1.57 W [0.003 HP] |
| Temperature control class | I |
| Energy efficiency | 1 % |
| Number of inputs | 6 |
| Inputs | 5 x temperature (Pt1000), 1 x temperature (Pt1000) or pulse |
| Additional inputs | 1 x Grundfos Direct Sensors™ (temperature / flow rate) |
| Number of outputs | 3 |
| Outputs | 2 x triac for speed control (R1, R2), max. 130 W / 0.17 HP (120 V AC); 1 x switch output relay (R3), max. 400 W / 0.5 HP (120 V AC) or R3 voltage free |
| Additional output | 1 x alarm output |
| Line cord | 75 inch, 3 x 18 AWG at 221 °F |
| Hydraulic schemes | 40 |
| Ambient temperature | 0 °C [+32 °F] … +45 °C [+113 °F] |
| Interfaces | SD card, RS-232, RS-485 (Steca TPC 1 bus) |
| Data logging | SD card |
| Degree of protection | IP 20 / DIN 40050 |
| Dimensions (X x Y x Z) | 170 x 178 x 90 mm [6.69 x 7.00 x 3.54 inch] |
| Weight | 1500 g [48.23 oz] |