Steca blau claim RGBSteca blau claim RGB
18977-head
18978-head
18979-head
19570-head
20900-head

Steca TF B202

Fresh water controller (compact)

Description

The particularly cost-effective Steca TF B202 fresh water controller is suitable for heating drinking water directly and hygienically using the instantaneous water heater principle for fresh water stations in the range of 0-20 l/min, 0-40 l/min and 0-80 l/min.

The new intelligent and self-learning control algorithm developed in the Steca fresh water laboratories enables a highly efficient energy transfer from the primary buffer to the secondary drinking water circuit with the aid of a multifunctional Huba Control flow sensor for flow and temperature detection. For OEM customers, there is also a flexible option of integrating alternative analogue flow transmitters.

The Steca TF B202 demonstrates its versatility by facilitating speed control of both standard glandless pumps and innovative high-efficiency pumps. The Steca TF B202 can also control a circulation pump. The controller offers time, temperature or pulse dependent control methods for this purpose.

Due to its small dimensions, the Steca TF B202 is especially easy to integrate into compact fresh water stations. The specially designed switching power supply guarantees the greatest possible efficiency and economical operation. This reduces self-consumption to a minimum. The variable input voltage range ensures universal and worldwide use. An electronic load control protects against overloading and installation errors.

In addition to controller operation, the Steca TF B202 performs important system monitoring and safety functions. This can be used to guarantee a continuous and safe hygienic drinking water supply. Special error messages are displayed for quickly rectifying faults.

Steca TF B202 technische Zeichnung

Features

Product features

  • Compact, multipart designer casing
  • Installation versions: Fresh water stations, wall installation, mounting rails
  • Wave packet (Triac) and pulse width modulation (PWM) ensure electronic RPM control
  • High level of operational safety through fault diagnosis
  • Hours-of-operation logger
  • Screw terminals allow universal and rapid installation
  • Low power consumption thanks to universal and widerange switched-mode power supply
  • Variable input voltage range for worldwide controller deployment
  • Electronic overloading control and protection

Displays

  • Multifunction graphical LC display with backlighting
  • Animated representation of the systems and operating states

Operation

  • Non-verbal menu navigation
  • Manual switch for manual, auto, off

Functions

  • Circulation (controlled by temperature / time / pulse)

Downloads

Certificates

  •  Steca TF B202 certificate CE · pdf · 0.000 MB

Product data sheet

  •  Steca TF B202 productdatasheet DE · pdf · 0,992 MB
  •  Steca TF B202 productdatasheet EN · pdf · 0.992 MB

Manuals

  •  Steca TF B202 manual DE · pdf · 3.029 MB

Product pics, technical drawings, etc.

  •  Steca TF B202 product pic 3D · jpg, 300 DPI, high quality · 1.234 MB
  •  Steca TF B202 product pic 3D · jpg, 72 DPI, web quality · 0.293 MB

Technical data

 TF B202
System voltage
115 V AC … 230 V AC, 50 Hz / 60 Hz
Own consumption
≤ 1 W (standby)
Number of inputs
2
Inputs
2 x temperature (Pt1000)
Additional inputs
1 x Huba Control flow sensor, type 200 DN10 (temperature / flow rate)
Number of outputs
2
Outputs
2 x triac for speed control (R1, R2), max. 250 W (230 V)
Ambient temperature
0 °C … +50 °C
Degree of protection
IP 22 / DIN 40050 [without front panel: IP 20]
Dimensions (X x Y x Z)
110 x 160 x 51 mm [0.00 x 0.00 x 0.00 inch]
Weight
350 g [0.00 oz]
 
x
Username:
Thank you, your request has been sent

Your request:

* = mandatory field
x

Product comparison

Not yet able to see all the products you want in the comparison list?
Add more products

How it works:
Open a product group and add the product to the product comparison using the "+ Compare product” button.