Checklist for planners
To ensure the reliable operation of your battery charging system, Steca offers you a large range of accessories. This checklist serves to help you choose what you need for your application.
Link to >>picture gallery
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Accessory cabinet
double-door material cabinet with shelves.
Acid waste disposal system
electric barrel pump for suctioning the waste from the sump on site, pump volume 40 l/h, hose with tap, hanging device and intake sieve.
Battery bank
made of hardwood (kiln-dried copper beech), planed and bevelled on all sides, with three coats of acid-proof lacquer.
Battery casing
with connection for non-heating appliance plug, for housing two 6-V lead batteries.
Battery charging cabinet
as a complete, area-independent charging station for lead-acid batteries.
Battery controller
allows you to get a reliable assessment of the battery's charge status.
Battery filling device
electric acid filling device with vacuum pump to safely fill batteries with acid.
Battery service set
consisting of a filling funnel, acid filling cup, cell tester, two pole cleaners and two washing bottles.
Battery testing device
program-controlled, fully automatic testing device for 12 V starter batteries and controller test.
Battery tray
acid-resistant PE tray where the batteries are placed for charging.
Cable holder
as a hanging device for charging cable which is not being used.
Cable retractor
made of high-quality plastic, protective electrical insulation, protection class IP 44, ball-bearing axis, hair-spring drive, surface grinding rings, twin-contact take-up, cable locking device which can be turned off, adjustable cable stopper, up to 10 m cable length, available as a fire brigade model with connector system according to DIN 14690.
Cable spring balancer
housing and cable drum made of sheet steel, rotating safety hook, steplessly adjustable spring resistance, 2 m cable pull-out length.
Canister tipper
for holding a 60-litre canister. Mobile and stationary models.
Carbon dioxide fire extinguisher
with snow nozzle, fire class B, complete with mounting, contents 5 kg.
Chassis
for mobile use of the charging devices STECAMAT 202, 222, 302, 312. Robust design with large wheels, storage shelves for cables, acid siphon and tools.
Disposable overall
with hood and elastic on sleeves, hood, legs and waist. Protection against liquids, dust, fibres and chemicals.
Eye-washing station
in wall-mounted cupboard, equipped with eye wash bottle (with dust-protection cap and spare bottle) and isotonic common salt solution.
First-aid kit
combination first-aid kit made of shock-resistant plastic with wall fixture. Contents protected against dust and splashes of water.
Grating
made of acid-resistant stainless steel with fitted frames, for covering the sump.
Hardhat
according to DIN 4840, made of polyethylene, extremely light, with injection-moulded ridge, adjustable ventilation and protective faceguard.
Hose retractor
for compressed air supply, in high-quality plastic design, maintenance-free axis, hair-spring drive, hose locking device, hosestopper, wall fixture, 6.5 m hose length.
Ionomat ion exchanger
for producing distilled water according to DAB (German Pharmacopoeia) 6 andVDE (Association of German Engineers) regulations, with hose for connecting to the water pipe.
PCE connection system
in 12 V and 12 V / 24 V models. Surface and flush-mounted wall sockets, connector and coupler plug.
Plastic plate
made from acid and alkaline resistant PE, shock- and abrasion-proof, as protective covering for shelves.
Platform lift
for lifting loads, height of lift up to 80 cm, frame and platform are manufactured in a warp-resistant steel construction and weight-reducing light design from high-strength sectional steel.
Portable battery lamp
Explosion-proof portable search light, incl. charging device.
Protective gloves
with sleeve, sure-grip, resistant to acids, bases and chemicals.
Round water barrel
made of low-pressure polyethylene, side drop handles, decanting armature, for distilled water.
Rubber mat
acid-proof.
Slatted wooden frame
made of hardwood (kiln-dried copper beech), planed and bevelled on all sides, with three coats of acid-proof lacquer, to lay over the battery bank.
Small lead battery
rechargeable, absolutely maintenance-free lead-gel battery, protected against deep discharge, short circuit-proof, high cycle resistance, 6 V/ 5 Ah.
Spiral cable
special spiral cable, oil-, petrol- and grease-resistant, spiral diameter 49 mm.
Spiral hose
spiral compressed air hose, approx. 11 m when extended, approx. 0.6 m when stowed.
Starter charger
for 12 V and 24 V, start help and normal charging, with chassis for easy transport, built-in LCD amperemeter, safety and monitoring electronics.
Sub-distributor
with VDE (Association of German Engineers) 0510 / DIN 57510 ventilator control, for installation before or in the charging station, for 2 to 24 chargers.
Transport trolley for liquid container
bottle holder with safety chain, suitable for outdoor use due to the high-quality powder coating.
Unauthorised entry sign
made of thermoplastic, self-adhesive, with text "Unauthorised entry forbidden".
Ventilation conduit system
made of plastic, galvanized sheet steel or stainless steel on request.
Ventilation unit
to ventilate battery charging rooms.
Warning sign
made of thermoplastic, self-adhesive, with text "Battery room, no open flames, no fire, no smoking".
Warning sign
made of thermoplastic, self-adhesive, with text ""Careful, acid".
Water refilling trolley
for refilling battery water independently of water mains, with filling pistol, plastic container with 60 l water capacity, 12 V / 6.5 Ah battery and accompanying charger.